janitza UMG 96-PA, User Manual And Technical Data

Page: 40 / 84

UMG 96-PA / UMG 96-PA
MID
www.janitza.com
40
Min. / max. Values
You can delete all minimum and maximum values
in the device at the same time. It is not possible
to select specific energy meters.
·Open the configuration menu (see chapter 12
“ ConfiiuratFon ”).
·Using keys 3 (

) and 4 (

) select the menu
item “ System ” from the configuration menu.
·Confirm using key 6 (Enter).
·Using keys 3 (

) and 4 (

) select the submenu
“ Reset ” and confirm with key 6 (Enter).
·With keys 3 (

) and 4 (

) select the function
“ MFng./maxg. values ” and confirm with key 6
(Enter).
·Using the keys 3 (

) and 4 (

) select the
desired option “ Yes” or “ No ”.
·Confirm your entries with key 6 (Enter) or
terminate the action with key 1 (Esc).
·Exit the view “ Reset ” by pressing key 1 (Esc).
·Exit the view “ System ” by pressing key 1 (Esc).
·Exit the configuration menu by pressing key 1
(Esc).
·Press key 1 (Esc) to open the main menu.
·Select the desired measured value display with
keys 3 (

) and 4 (

) . Confirm the selection
with key 6 (Enter) or navigate to the measured
value display
“OvervFew” by pressing key 1
(Esc).
Factory settings
Under the entry “Factory settings” in the
“Reset” window, you reset all settings, such as
configuration and recorded data, to the factory
default settings.
·Open the configuration menu (see chapter 12
“ ConfiiuratFon ”).
·Using keys 3 (

) and 4 (

) select the menu
item “ System ” from the configuration menu.
·Confirm using key 6 (Enter).
·Using keys 3 (

) and 4 (

) select the submenu
“ Reset ” and confirm with key 6 (Enter).
·Using keys 3 (

) and 4 (

) select the function
“ actory settFni ” and confirm with key 6 (Enter).
·Using the keys 3 (

) and 4 (

) select the
desired option “ Yes” or “ No ”.
·Confirm with key 6 (Enter) or cancel the action
with key 1 (Esc).
·Confirm the warning with key 6 (Enter) or cancel
the action with key 1 (Esc).
·The device restarts.
NOTE
Before commissioning, delete possible
production-related contents of the energy
meter, the min./max. Values and recordings.
Fig. Menu “Reset”,
delete mFng./maxg. values
Fig. “Reset” menu, load factory state
NOTE
When resetting the UMG 96-PA
MID
to factory
settings, the current and voltage transformer
settings cannot be reset!