UMG 96-PA
/ UMG 96-PA
MID
www.janitza.com
38
12.4 System
Displays device-specific system settings,
password assignment and a function for
resetting values.
1
Firmware version
2
Device’s serial number
3
Device time / date
4
Password function
5
Reset settings
The “
System
” screen is displayed:
·Open the configuration menu (see chapter 12
“
ConfiiuratFon
”).
·Using keys 3 (
) and 4 (
) select the menu
item “
System
” from the configuration menu.
·Confirm using key 6 (Enter).
12.4.1 Firmware / serial number
Export the device firmware version and the
device-specific serial number for potential
support inquiries or to register on the Janitza
homepage (
wwwg.janFtzag.de
).
12.4.2 Time
Displays current device time. You can change
the settings for time synchronization, date/time
zones and time via the GridVis® software or
using the respective Modbus addresses.
12.4.3 Password
You can use a password to block access to the
configuration. The device can only be configured
after entering the password.
The password consists of a number combination
of up to 5 digits.
Setting ranges (
devices without MID
):
·
1-99999 = WFth password
·
0
= No password
Default setting:
·
0 = No password
No password (=0) is programmed for UMG 96-PA
by the factory!
NOTE
Other requirements for password configuration
apply to the
UMG 96-PA
MID
(see „14.7 Password
configuration“ on page 65).
To change the password, you need the current
password.
NOTE
·Note your password and keep it in a safe
place!
·You cannot configure your device without
a password. Contact Janitza support if you
lose the password!
Fig.
Screen “System”
1
2
3
4
5
Fig.
Screen “ConfiiuratFon”, selectFon “System”
