![janitza UMG 96-PA User Manual And Technical Data Download Page 10](http://html2.mh-extra.com/html/janitza/umg-96-pa/umg-96-pa_user-manual-and-technical-data_3395462010.webp)
UMG 96-PA
/ UMG 96-PA
MID
www.janitza.com
10
3.1 Incoming goods inspection
The prerequisites for smooth and safe
operation of this device and its components
include proper transport, storage, setup and
assembly, operation and maintenance, as well
as observance of the safety instructions and
warning notices.
Exercise caution when unpacking and packing
the device, without using force and only using
suitable tools.
Perform a visual inspection of the device to
ensure the fault-free mechanical condition.
Please check the scope of delivery for
completeness before beginning with the
installation of the device.
If you assume that safe operation is no longer
possible, the device must be shut down
immediately and prevented from unintended
re-commissioning. It can be assumed that
safe operation is no longer possible, when, for
example, the device:
·has visible damage,
·no longer functions despite an intact power
supply,
·was subjected to extended periods of
unfavorable conditions (e.g. storage outside
of the permissible climate thresholds without
adjustment to the room climate, condensation,
etc.) or transport stress (e.g. falling from
an elevated position, even without visible
external damage, etc.).
3.2 EC declaration of conformity
The laws, standards and directives applied for
the devices by Janitza electronics GmbH can
be found in the EC declaration of conformity at
www.janitza.de.
3. Product description
3.3 Intended use
The device is:
·intended for installation in switching cabinets
and small installation distributors.
·not intended for installation in vehicles! Using
the device in mobile equipment is considered
an unusual environmental condition and is only
permissible by special agreement.
·not intended for installation in areas exposed
to harmful oils, acids, gases, vapors, dust and
radiation, etc.
·designed as an indoor meter.
NOTE
All screw-type terminals that belong to the
scope of delivery are plugged into the device.
NOTE
All options and design versions supplied are
described on the delivery note.
CAUTION
Risk of injury due to fire or chemical burns!
The batteries used in the device can lead to fire
or chemical burns if used improperly.
·
Only replace batteries with the same types
or those recommended by Janitza!
·
Observe the polarity when installing the
battery!
·
Remove batteries with non-conductive
tools only (e.g. plastic tweezers)!
·
Do not recharge, destroy, heat up over
100 °C (212 °F) or burn batteries!
·
Do not dispose of batteries with household
waste! Observe the disposal requirements
in the respective device documentation!
·
Keep batteries away from children and
animals!
·
Send devices with soldered batteries
back to the manufacturer taking into
consideration the transport conditions in
the event of damage!
The following applies to the battery used in the
device: