www.janitza.com
UMG 96-PA
/
UMG 96-PA
MID
63
14. UMG 96-PA
MID
Fig.
Rear vFew of the UMG 96-PA
MID
wFth termFnal covers,
sealFni devFces and devFce for sFlFcone sealg.
Fig.
InstallatFon of the termFnal covers on the UMG 96-PA
MID
Sealing
devices
Device for
silicone seal
The UMG 96-PA
MID
is certified according to the
Measuring Instruments Directive (MID) and differs
to the UMG 96-PA with respect to installation
and operation. More information on the MID
Measuring Devices Directive can be found at
www.janitza.de/mid-messgeraete-richtlinie.html
14.1 Intended use
The UMG 96-PA
MID
must be used in accordance
with national requirements. The calibration
validity period is based on the applicable national
law.
Before using the device, make sure you are
aware of the national provisions and current
regulations relating to electronic counters, on
calibration duration periods and the extensions
thereof.
NOTE
UMG 96-PA
MID
:
·Use calibrated measurement transducers to
use the device for billing purposes.
14.2 Assembly
NOTE
UMG 96-PA
MID
:
For tamper-proof installation
(MID-compliant)
·Install the MID device with the supplied
silicone seal (scope of delivery) between
the device and the installation recess in the
protected switch cabinet.
·After installing the device (refer to chapter 6 on
page 18), use the supplied terminal covers
(scope of delivery) and seal them with seals on
the designated devices.
Fig.
ront of devFce UMG 96-PA
MID
