-
USER’S MANUAL
69
MENU SETUP
6.5.3 VIDEO STANDARD
①
Enter the
SYSTEM
menu.
②
Select from “AUTO”, “NTSC” or “PAL”. The default is “NTSC”.
6.5.4 LANGUAGE
①
Enter the
SYSTEM
menu.
②
Select the desired language.
6.5.5 REMOTE CONTROL ID
①
Enter the
SYSTEM
menu.
②
Set the REMOTE CONTROL ID. The default is “ALL”.
6.5.6 KEY ECHO
At the SYSTEM menu,
①
Enter the
SYSTEM
menu.
②
Set “ON” or “OFF”. The default is “ON”.
6.5.7 ADVANCED SETUP
①
Enter the
SYSTEM > ADVANCED SETUP
menu.
Note:
- If you are operating more than one DVR in the same place and wish to use the remote controller, the remote controller
ID setup is required. Otherwise,
do not change
the default set value and “ALL” should be selected.
- Creates the Remote controller ID:
Select one of the numbers 11~14, 21~24, 31~34, 41~44, and then press the same number button on the supplied
remote controller before the operation.
- ON : The beep sounds when you press any buttons on the front panel.
- OFF : The beep does not sound.
Note:
- If you select “AUTO”, this DVR can detect NTSC/PAL automatically.
Note:
- Available languages: ENGLISH, KOREAN, JAPANESE, POLISH, SPANISH, RUSSIAN, CHINESE, TAIWANESE.