-
USER’S MANUAL
76
MENU SETUP
6.6.1.7 DYNAMIC IP SERVER
•
The “dynamic IP server” is used when a DVR have a dynamic
public
IP.
•
Open IE and input the “\dynamic IP server’s IP, you will see the remote view interface. Then input the
MAC address
of
DVR and ID, password. You can connect to DVR without to know the DVR IP.
•
Or if you know the DVR public IP, you can through “dynamic IP server” to access DVR by IE as well.
•
DVR will register the MAC address itself to “dynamic IP server” and “backup IP server” as well.
①
DHCP set “ON”
②
Input the dynamic server’s IP. The default IP is a available server.
6.6.1.8 BACKUP IP SERVER
①
DHCP set “ON”
②
Input the backup IP server’s IP. The default IP is a available server.
6.6.1.9 NETWORK FRAME
①
Select the desired value to select an image frame to be transported from DVR to network client
viewer.
** Please refer to the below image in case of a PPPOE type connection:
DDNS
Note:
- DHCP is a protocol for assigning dynamic IP addresses to devices on a network.
- You have to connect with Router in case of using a network of PPPOE type because this unit doesn’t have a PPPOE
protocol.
Note:
NETWORK FRAME is use for the transported image being influenced by Network speed.
- STILL: Use when the local network speed is too slow.
- MOTION: Use when the normal situation of network speed.
TIPS
