USER’S MANUAL
20
OPERATION
SINGLE SCREEN MODE
Press the FREEZE button after the desired channel is selected.
Press the FREEZE button again to release the FREEZE mode.
5.2.3 RECORD
•
This button will enable DVR recording mode.
•
When the recording mode on, schedule recording will automatically start and stop recording by your settings.
•
If schedule recording is off, DVR will begin to manual recording.
•
The recording mode will not disable when you playback or enter setup menu, unless you press the button again.
Press the REC button and the following message will be displayed:
MANUAL MODE
Press the REC button to begin recording. To stop recording,
press the REC button again. The screen will be turned into real time display mode.
SCHEDULE MODE
When Schedule mode is selected, the recording will be automatically executed according to the
recording schedule (Please refer to the 6.3.2 RECORD PROGRAM in the RECORD setup, P50.)
NOTE:
- If you press the MULTI button after pressing the FREEZE button, all the channels will display still
images.
- FREEZE function is not available, when auto mode is selected. Please refer to the 6.2.1 AUTO
SEQUENCE,P.42
Recording status will be shown on the screen as different words according to the type of
recording and refer to the following.
N
N
N
N:
:
:
:
Manual recording status.
S
SS
S:
:
:
:
Schedule recording status.
E
E
E
E:
:
:
:
Event recording status. (Motion detection/ Video loss/ Sensor)
-:
-:
-:
-:
Not recording.
Note:
- If a channel has an event, all channels will be recorded by event recording frame rate to be set in
RECORD PROGRAM menu.
TIPS