USER’S MANUAL
62
MENU SETUP
6.4.1.3 AREA SETUP
①
Enter the
EVENT > MOTION DETECTION > AREA SETUP
menu.
②
Select the motion detection area using the
,
,
,
buttons and then press the ENTER
button to activate / deactivate the area.
③
Turn the shuttle ring to the right to select all cells for motion detection and turn the shuttle ring to
the left to reset all area.
④
Press ESC button to exit.
6.4.1.4 TEST MOTION
①
Enter the
EVENT > MOTION DETECTION > TEST MOTION
menu.
②
Press the ENTER button to test the motion detection.
③
Press ESC button to exit.
6.4.2 EVENT SCREEN MODE
①
Select from “SCREEN HOLD”, “EVENT FULL”, “EVENT MULTI”, “EVENT F RTN”, “EVENT M
RTN”. The default is “SCREEN HOLD”.
6.4.3 EVENT CHECK
•
This switch is important.
•
It depends whether DVR will check the event or not. Such as motion detection, sensor trigger etc.
①
Select from “ON” or “OFF”. The default is “ON”.
6.4.4 EVENT MESSAGE
①
Select from “ON” or “OFF”. The default is “OFF”.
6.4.5 EVENT MESSAGE RESET
①
Set the time to reset the OSD event message from 1SEC to 30SEC. The default is “5SEC”.
ON: The warning message will be displayed when the event occurs.
Note:
- Mouse operation:
Enable Cell: Left button click (without releasing the button) and drag from the left top to the right bottom cell.
Disable Cell: Right button click (without releasing the button) and drag from the left top to the right bottom cell.
- AREA SETUP GRID: 30 x 24
SCREEN HOLD : Keeping the current screen even if the event occurs.
EVENT FULL : Display the full screen of the channel which the event occurs.
EVENT MULTI : Display the multi-screen when the event occurs.
EVENT F_RTN : Display the full screen of the channel which the event occurs and return.
EVENT M_RTN : Display the multi-screen when the event occurs and return.
Note:
- If you want to use this function, you have to set EVENT setting of each channel of RECORD PROGRAM by “O(ON)”.
TIPS
