USER’S MANUAL
2
CONTENTS
•
Make sure to switch the power off before you install the DVR.
•
There is the danger of an electric shock if the DVR is opened by an unqualified
service engineer or installer.
•
Avoid using the DVR outside of the reference temperature and humidity indicated
in the specification.
•
Avoid exposing the DVR to violent movement or vibration.
•
Do not use or store the DVR in direct sunlight or near to any source of heat.
•
Do not place any object into the holes used for air circulation.
•
Before connecting the power cord, please select the correct voltage for local use.
You may switch between DC 12V / 10A .
•
Always use the DVR in a well ventilated location to prevent overheating.
•
Risk of explosion if battery is replaced by an incorrect type.
•
Dispose of used batteries according to the instructions.
•
When the system is overheated, the below warning message will be displayed at
the monitor.
“ SYSTEM IS OVERHEATED, TURN THE POWER OFF AND CHECK COOLING FAN”
In this case, do the power off right away and check the cooling fan working.
•
The HDD is recommended to use enhanced IDE Hard Disc Drive type.
All the safety and operating instructions must be read before the unit is operated.