USER’S MANUAL
90
NETWORK VIEWER INSTALLATION
Chapter 9
HDD INSTALLATION PROCESS
9.1 INSTALL the INTERNAL HARD DISK DRIVE(s).
Note:
(1) Set the master or slave of HDD before fixing the HDD(s) into DVR. Refer to HDD jumper setting
information.
(2) Set up no. 1 and 3 by master and no. 2 and 4 by slave.
PCI SLOT
Description
Jumper Setting
A
For Removable HDD (Optional)
Master
B
For Fixed HDD (1 and 2)
No.1 for Master and No.2 for Slave
C
For Fixed HDD (3 and 4)
No.3 for Master and No.4 for Slave
When installing the HDD, format it before operation (It is suggested, once the HDDh
as been installed, unless necessary, do not replace the HDD).
HDD Jumper Setting Information
Before install the Hard Disk Drive(s), please read the jumper setting information
on the label. If the jumper is not set properly, the system will be disordered.
Jumper setting is different according to HDD model.
**DVD
±
RW(or CD-RW) Jumper Setting Information
Please visit following web sites of Hard Disk Drive manufacturer for more
information about jumper setting.
HITACHI :
www.hitachi.com
MAXTOR :
www.maxtor.com
SAMSUNG :
www.samsunghdd.com
SEAGATE :
www.seagate.com
WESTERN DIGITAL :
www.westerndigital.com
