USER’S MANUAL
35
MENU SETUP
5.2.12.1 PTZ control in live view
①
Press the “PTZ” button to control pan, tilt and zoom functions of PTZ camera and the PTZ
channel, model name and ID will be displayed on the left side of the monitor as the following picture.
②
Press the desired camera button to be displayed.
③
Use the or button to pan left and right and the or button to tilt up and down.
④
Turn the SHUTTLE ring to zoom in and out.
⑤
Use the (-) or (+) button to focus. Or press the (AF) button for auto focusing.
⑥
Press the PTZ button again to exit the PTZ mode.
5.2.12.2 PTZ PRESETTING
•
Preset point is a convenient usage of PTZ camera. It is a user-defined camera position using pan, tilt, zoom and focus
commands.
•
This DVR has the Programming capacity for 16 preset locations for 16CH.
•
This DVR has the Programming capacity for 8 preset locations for 8CH.
①
Press the “
PTZ
” button to enter
PTZ
mode.
②
Press the “
PRESET
” button to enter
PRESET
mode and “
PTZ (PRESET) MOVE
” OSD will be
displayed on the left side of the monitor.
③
Move to the desired preset location using the “
NUMBER
” buttons.
④
Press the “
PRESET
” button again and “
PTZ(PRESET)SET
”, OSD will be displayed on the left
side of the monitor.
⑤
Make the desired setting of the
PTZ
camera using the
,
,
,
, (-), (+) buttons.
⑥
Press the “
NUMBER
” button to set up the revised presetting.
TIPS