Jands DMR_1681DR User Manual Download Page 74

Page: 74 / 131

USER’S MANUAL

MENU SETUP

6.5.8 FIRMWARE UPGRADE

①

Enter the

SYSTEM > FIRMWARE UPGRADE

menu.

②

If you want to update firmware using the USB_FRONT port, move the cursor to “YES” and then

press the ENTER button. If not, move the cursor to “NO” and then press the ENTER button.

③

Press ESC button to exit.

6.6 LINK

•

You can setup all of the internet network function and PTZ camera setup here.

•

This DVR support dynamic IP and static IP.

•

Remote view from Internet Explorer or dedicate software. Software provide plenty functions include menu setup. IE

support only simple viewing.

•

This DVR doesn’t support xDSL, there is a DYNAMIC IP SERVER, but no PPPoE protocol.

①

Enter the

LINK

menu.

Note:

- To upgrade the firmware only from front USB port.

TIPS

Summary of Contents for DMR_1681DR




































































































































Search results

Summary of Contents for DMR_1681DR

Reviews:

Related manuals for DMR_1681DR

Brands by name

Popular brands

Jands DMR_1681DR, User Manual

Search results

Summary of Contents for DMR_1681DR

Reviews:

Related manuals for DMR_1681DR

Brands by name

Popular brands