Jackson Labs PHASE STATION 53100A, User Manual

Page: 111 / 225

PhaseStation 53100A User’s Manual V1.04 25-Apr-2022 111
Ch 1 Auto True if Ch 1 frequency should be measured automatically
Ch 1 Enabled Enabled/disabled status for channel 1
Ch 1 Freq Specified input frequency for channel 1
Ch 1 Freq Mode Input frequency measurement mode for channel 1
Ch 1 Label User-assignable label for source connected to instrument channel 1
Ch 1 Noise Ref Reference for DUT channel 1 (Noise)
Ch 1 Rounding Input frequency rounding parameter for channel 1
Ch 1 Specified Frequency Input frequency specification parameter for channel 1
Ch 1 Stability Ref Reference for DUT channel 1 (Stability)
Ch 1 Type Input type for channel 1
Ch 2 Auto True if Ch 2 frequency should be measured automatically
Ch 2 Enabled Enabled/disabled status for channel 2
Ch 2 Freq Specified input frequency for channel 2
Ch 2 Freq Mode Input frequency measurement mode for channel 2
Ch 2 Label User-assignable label for source connected to instrument channel 2
Ch 2 Noise Ref Reference for DUT channel 2 (Noise)
Ch 2 Rounding Input frequency rounding parameter for channel 2
Ch 2 Specified Frequency Input frequency specification parameter for channel 2
Ch 2 Stability Ref Reference for DUT channel 2 (Stability)
Ch 2 Type Input type for channel 2
Ch 3 Auto True if Ch 3 frequency should be measured automatically
Ch 3 Enabled Enabled/disabled status for channel 3
Ch 3 Freq Specified input frequency for channel 3
Ch 3 Freq Mode Input frequency measurement mode for channel 3
Ch 3 Label User-assignable label for source connected to instrument channel 3
Ch 3 Noise Ref Reference for DUT channel 3 (Noise)
Ch 3 Rounding Input frequency rounding parameter for channel 3
Ch 3 Specified Frequency Input frequency specification parameter for channel 3
Ch 3 Stability Ref Reference for DUT channel 3 (Stability)
Ch 3 Type Input type for channel 3
Ch 4 Auto True if Ch 4 frequency should be measured automatically
Ch 4 Enabled Enabled/disabled status for channel 4
Ch 4 Freq Specified input frequency for channel 4
Ch 4 Freq Mode Input frequency measurement mode for channel 4
Ch 4 Label User-assignable label for source connected to instrument channel 4
Ch 4 Noise Ref Reference for DUT channel 4 (Noise)
Ch 4 Rounding Input frequency rounding parameter for channel 4
Ch 4 Specified Frequency Input frequency specification parameter for channel 4
Ch 4 Stability Ref Reference for DUT channel 4 (Stability)
Ch 4 Type Input type for channel 4
Ch 5 Label User-assignable label for source connected to instrument channel 5
Channel Identifies the (zero-based) channel number associated with a
multichannel acquisition
Channel Attenuators Comma-separated attenuation values in dB for each channel
Clock Nominal True if the clock frequency is a nominal value that may be refined
during self-calibration
Clock Oscillator Offset Margin offset frequency in Hz for clock oscillator
Clock Signal Generator Address of clock signal generator
Clock Signal Monitor Address of clock signal monitor
Clock Stabilizer True if clock duty cycle stabilization is enabled
CM Servo Common-mode servo functionality for ADC inputs
Comment Prefix ASCII text comment delimiter
Counter Connection Type Interface used for acquisition from TIC or frequency counter
Cross ID Binding identifier for cross-statistical measurement plots
Cross Stability Metrics True if cross statistics should be applied to stability measurements
Data Format Indicates the format of the incoming data (e.g., decimal, hex,
binary)
Data Port Instrument data port
Data Type Indicates the type of the incoming data (e.g., phase differences,
frequency differences, or absolute frequency)
Decimation Hardware decimation ratio
Device ID Instrument serial number or other identifier
Dither Level Level of dithering applied to reduce spurious responses in input
signals
Driver Identifies the TimeLab .TLL driver used for acquisition
Driver version Version of TimeLab driver used for data acquisition
Duration Measurement duration
Duration Type Measurement duration units
DUT Freq Frequency of device under test (DUT) provided by user, prior to any
conversion, multiplication, or division
EFC Acquisition clock EFC DAC value
Elapsed Elapsed time in the current measurement or measurement stage
ENBW Equivalent noise bandwidth in Hz of recorded phase data
ENBW Factor Equivalent noise bandwidth of recorded phase data, expressed as a
fraction of the data rate
ENBW Index Index or other identifier for a given noise-equivalent measurement
bandwidth
EOS Character End-of-string character for data source
Ext Converter External frequency divider or mixer configuration
Ext LO Specified frequency in MHz of local oscillator used for external
mixing