Jackson Labs PHASE STATION 53100A, User Manual, Page: 195 / 225

PhaseStation 53100A User’s Manual V1.04 25-Apr-2022 195
In this example, several different commands and queries were transmitted to TSERVE from the Telnet
client application, including the
start command to begin data acquisition. These user-entered
commands appear in black-on-white text in the Telnet client window and are displayed in bold white
text at the server console. After the user issued the final
quit command at 4:55:54 PM, the Telnet
session ended. The server (and the measurement acquisition) continued to run, awaiting further
connections.
An alphabetical list of supported commands and queries appears below. Except as noted, TSERVE’s
remote command syntax is compatible with the Microsemi/Symmetricom/TSC 5125A and other phase
noise test sets in the 51XXA series. Applications and test scripts written for these instruments should
run on a PhaseStation 53100A with little or no adaptation.
Note that multiple commands may be entered on one line by separating them with semicolons.
beep
Plays a sound on the TSERVE host PC.
close
Closes the output stream data file most recently opened with the open command or
/file:
command-line option.
Figure 77