Jackson Labs PHASE STATION 53100A, User Manual

Page: 150 / 225

PhaseStation 53100A User’s Manual V1.04 25-Apr-2022 150
DisplayRefresh([Number mask])
Forces an immediate display refresh that includes the elements specified by
mask
. If no
parameter is passed, all display elements are refreshed.
Currently-defined display elements include the following:
DisplaySpotTau(Number secs)
Sets the location of the spot cursor on Allan deviation and related log-log statistical plots
to the desired tau interval in seconds, returning the previous cursor location.
DisplaySpotTime(Number secs)
Sets the location of the spot cursor on phase- and frequency-difference plots to the
desired X-axis value in seconds, returning the previous cursor location.
DisplaySpotOffset(Number Hz)
Sets the location of the spot cursor on phase noise and AM noise plots to the desired
Fourier offset in Hz, returning the previous cursor location.
DisplaySpotLowerOffset(Number Hz)
Sets the location of the lower integration limit cursor on phase noise plots to the desired
Fourier offset in Hz, returning the previous cursor location.
DisplaySpotUpperOffset(Number Hz)
Sets the location of the upper integration limit cursor on phase noise plots to the
desired Fourier offset in Hz, returning the previous cursor location.
EventAcqDone([success][,user])
This is an optional user-supplied function.
EventAcqDone()
is called when an acquisition
ends, either because the requested measurement duration expired, because an error
occurred, or because it was stopped manually by the user. The optional
success
parameter is a Boolean value that indicates whether the hardware driver reported any
errors during the measurement. The optional
user
parameter receives the optional user
variable passed to
AcqStartAcquisition()
.
See
EventRunScript()
for further information.