Jackson Labs PHASE STATION 53100A, User Manual, Page: 165 / 225

PhaseStation 53100A User’s Manual V1.04 25-Apr-2022 165
Sets and/or retrieves the
status
of the flag controlled by Trace→Phase/frequency Y axis
unlocked in zoom mode ( y ) . Refer to this command for more information.
To return the current flag value, call
TracePhaseFreqAutoY()
with no argument.
TracePhaseFreqResid([Boolean status])
Sets and/or retrieves the
status
of the flag controlled by Trace→Show linear
phase/frequency residual ( r ) . Refer to this command for more information.
To return the current flag value, call
TracePhaseFreqResid()
with no argument.
TracePhaseFreqTrend([Boolean status])
Sets and/or retrieves the
status
of the flag controlled by Trace→Show linear
phase/frequency trend ( Ctrl-t ) . Refer to this command for more information.
To return the current flag value, call
TracePhaseFreqTrend()
with no argument.
TracePhaseFreqZero([Boolean status])
Sets and/or retrieves the
status
of the flag controlled by Trace→Phase/frequency traces
begin at zero ( z ) . Refer to this command for more information.
To return the current flag value for the phase- or frequency-difference view, call
TracePhaseFreqZero()
with no argument.
TracePhaseZero([Boolean status])
Sets and/or retrieves the
status
of the flag used by Trace→Phase/frequency traces begin
at zero ( z ) when phase-difference measurements are selected for viewing. Refer to this
command for more information.
To return the current flag value for the phase-difference view, call
TracePhaseZero()
with
no argument.
TraceShowCorrGain([Boolean status])
Sets and/or retrieves the
status
of the flag controlled by Trace→Show correlation gain
for selected noise trace ( Ctrl-g ) . Refer to this command for more information.
To return the current flag value, call
TraceShowCorrGain()
with no argument.
TraceShowCrossStatistics([Boolean status])
Sets and/or retrieves the
status
of the flag controlled by Trace→Show cross ADEV traces
when available ( Ctrl-j ) . Refer to this command for more information.
To return the current flag value, call
TraceShowCrossStatistics()
with no argument.