Jackson Labs PHASE STATION 53100A, User Manual

Page: 197 / 225

PhaseStation 53100A User’s Manual V1.04 25-Apr-2022 197
pause <chart>
pause phasediff and pause freq will inhibit updates to the phase difference and frequency
difference charts, respectively. Updates may be resumed with resume phasediff or resume
freq
. (The inconsistent chart nomenclature is required for compatibility with the TSC 51XXA
command language.)
prompt <on|off>
The prompt off and prompt on commands will disable and enable the Telnet command prompt,
respectively. The prompt is enabled by default. prompt off is equivalent to the
/noprompt
command-line option.
quit
Closes the Telnet connection. The TSERVE server will continue running, as will any
measurement in progress.
removelinear <on|off>
When removelinear on is in effect, the linear trendline most recently measured by the
measurelinear
command will be removed from subsequent phase-difference charts returned by
the show phasediff command. Use removelinear off to disable linear-trend subtraction.
reset
restorefactorydefaults
When the Telnet server thread is created by TSERVE at startup time, copies of the default values
for the
phaserate , tau0 , referencefreq , inputfreq, prompt , dateformat , timeformat , and title
properties are associated with the server instance, taking into account any changes made to the
program defaults at the TSERVE command line. These properties subsequently apply to any
measurements initiated by either Telnet clients or by a
/start
parameter on the TSERVE
command line. Clients may alter these server property values by issuing the appropriate set
commands. Changes made to the server property values will apply to acquisitions that are
subsequently initiated by that client or any others.
Issuing a reset or restorefactorydefaults command will immediately stop any measurement in
progress. TSERVE will continue running and any clients will remain connected, but the server
default properties will be restored to the program default or command-line values, just as if
TSERVE had been terminated and restarted. The
reset and restorefactorydefaults commands
behave identically.
resume <chart>
See pause .