Jackson Labs PHASE STATION 53100A, User Manual, Page: 193 / 225

PhaseStation 53100A User’s Manual V1.04 25-Apr-2022 193
Typically the
/wait
option is used to keep Windows from discarding useful status or error
information by closing the console window immediately upon termination. It is not necessary
when TSERVE is launched directly at an MS-DOS prompt, but may be helpful when launching
from a desktop shortcut.
/warn
By default, a TSERVE-hosted measurement will stop If any significant changes in signal
amplitude or frequency are observed at either the DUT or REFERENCE input ports. Using the
/warn
option will allow the measurement to continue running when non-fatal anomalies are
encountered. This option is equivalent to unchecking the
All warnings fatal
option in the
Additional options
page of the PhaseStation 53100A acquisition dialog.
When a measurement stops due to an error condition, any streaming data connections will
remain open, and any Telnet or terminal clients will remain connected. Clients attached to the
command port can query the status of the measurement with the
show state and show
message commands, while clients connected to the streaming data port will receive error and
warning messages if the
/notify
option was specified on the TSERVE command line.