Iveco NEW DAILY, Instructions Manual

Page: 44 / 240

20
NEW DAILY
–
CHASSIS INTERVENTIONS
CHASSIS INTERVENTIONS
2.5
REAR OVERHANG MODIFICATION
–
Printed 603.95.789
–
1 Ed. - Base 02/2014
Elongation
Possible solutions, in relation to the length of the extension, are shown in Figures 8, 9 and 10.
Cuts can be of straight type. The minimum dimensions of the reinforcements to apply in the area of modification are shown in
Figure 2.3.
The solution for elongations no greater than 300 ÷ 350 mm is shown in Figures 8 and 9. In this case, the corner reinforcements,
which also serve as junction between cross member and frame, must have the same width and thickness of the original gusset plate.
The union between the cross member and plate, originally performed using nails, can be done with screws class 8.8 having the next
largest scale diameter and anti-unscrewing nuts.
▶
For vehicles equipped with the ESP system, see Chapter 2.15 - Paragraph "Derating of the ESP
system".
The solution for elongations greater than 350 mm is shown in Figure 10.
208211
Figure 8
208212
Figure 9