Iveco NEW DAILY, Instructions Manual

Page: 196 / 240

8
NEW DAILY
–
ADBLUE AND SCRT SYSTEM
ADBLUE AND SCRT SYSTEM
6.3
INSTRUCTIONS
–
Printed 603.95.789
–
1 Ed. - Base 02/2014
AdBlue refuelling filler
The filler assembly consists of:
●
a filler with a specific plug for AdBlue filler nozzles, a filter and a magnet for opening the nozzle valve;
●
a pipe connecting the filler to the tank breather.
if the filler door on the bodywork is modified, best possible access to the plug must be maintained.
The following points are mandatory since AdBlue crystallises at -11
°
C:
●
ensure the pipe is at an incline which prevents urea from collecting (syphons) inside;
●
respect the original incline of the filler in relation to the ground; any variation in this value must be authorized by IVECO.
Note The parts in plastic must be at least 200 mm from any heat source (eg. exhaust system); if heat-protecting panels are used this
distance can be reduced to 80 mm.
Moving AdBlue system components
208932
Figure 3
1. SCR catalytic converter
2. Pumping module (SM)
3. AdBlue tank
4. AdBlue refuelling inlet
5. AdBlue delivery pipe
6. DPF Particulate filter
7. Dosing module (DM)
If it is necessary to move the AdBlue tank for outfitting needs, this must be done making sure that the installation heights module of
the SM module and the pipes respect the conditions illustrated in Figure 5.