Iveco NEW DAILY, Instructions Manual

Page: 144 / 240

8
NEW DAILY
–
ELECTRONIC SUB-SYSTEMS
ELECTRONIC SUB-SYSTEMS
5.2
BODY BUILDER CONNECTORS
–
Printed 603.95.789
–
1 Ed. - Base 02/2014
Pin Description Signal Remarks
17 Ground
Output
max 15 A
18 Not connected
19 Not connected
20 Not connected
12-pole connector (72075)
101554
Figure 4
Existing part on vehicle (male) Counterpart to be coupled (female)
Table 5.3
Code Description
500314814 12 way male connector
500314820 Male contact for cable 0.3 to 0.5 mm²
500314821 Male contact for cable 1 to 1.5 mm²
Table 5.4 - Basic functions of 12 pin connector
Pin Description Signal Remarks
1 Speed limitation
input
Max 10 mA
By providing a ground, vehicle speed is limited to 30 km/h
Ground = speed limitation active
2
Programmable speed lim-
iter; input
Max 10 mA
By providing a ground, the current speed limitation activ-
ates / deactivates
Ground = speed limitation activated / deactivated
3 Multiple switch Available for power take-offs
4 Speed signal (B7)
See specification 1
5 Key ON-replicate
input
Max 500 mA
By providing a positive, the first turn of the key is simu-
lated (key set to ON). Only main loads are powered but
it is not possible to start the vehicle from the outside since
the vehicle key recognition is missing.
+12V = key active
Open circuit = key not activated
6 Power take-off activation
Output
Max 500 mA
Ground is obtained when the power take-off is engaged
Ground = power take-off engaged
Open circuit = power take-off disengaged