Iveco NEW DAILY, Instructions Manual

Page: 134 / 240

14
NEW DAILY
–
POWER TAKE-OFFS
POWER TAKE-OFFS
4.5
PTO MANAGEMENT
–
Printed 603.95.789
–
1 Ed. - Base 02/2014
Multiple State Switch
An additional feature used to manage the number of revolutions with PTO engaged, available on the 12-way body builder con-
nector (pin 3 - pin 8).
To obtain this feature, the circuit shown in the diagram in Figure 8 must be implemented.
208928
Figure 8
Multiple State Switch (example)
A. 12-pin body builder connector
B. Responsibility of the body builder
1. Pull-up (in ECU)
2. Pull-down (only for EDC7CI)
Table 4.3
Resistance Values [Ohm] R0 R1 R2 R3
120 270 510 2000
Programmable speed
[rpm] - basic settings
PTO 0 PTO 1 PTO 2 PTO 3
CM 900 1200 900 1200
CA 1200 1200 1200 1200
Resistance ¼ of W and tolerance 1%.
Operation:
1. With the vehicle stopped and the switch on position 0:
■
Manual operation - press the RESUME button on the Cruise Control to increase the engine speed to the programmed
speed