Product description
Page 35
3.4.1
Serial interface [X5]
The RS232 protocol is mainly intended to be a parameterisation interface, but also allows the control of the item servo
positioning controller C Series.
3.4.2
USB interface [X19]
This interface, too, was mainly intended as a parameterisation interface, but it can also be used for controlling the item servo
positioning controller C Series.
3.4.3
UDP interface [X18]
The UDP communication enables the connection of the item servo positioning controller C Series to the Ethernet fieldbus
system. The communication via the UDP interface [X18] is realised with the aid of a standard cabling.
3.4.4
CAN interface [X4]
The CANopen protocol as per DS301 with application profile DSP402 is implemented.
