Service functions and error messages
Page 122
Error message
Meaning of the error message
Measures
Main
index
Sub index
2
PROFIBUS:
communication error
Check the slave address.
Check the bus terminators.
Check the cabling.
3
PROFIBUS:
invalid slave address
Incorrect slave address. Please select another slave address.
4
PROFIBUS: error in value range
Mathematical error during the conversion of physical units.
The value range of the data and of the physical units do not
match (fieldbus display units).
If necessary, contact the Technical Support.
23
0
No consumable record
Position save and restore failed, homing required.
1
Record with invalid checksum
2
Flash content inconsistent
25
0
Invalid device type
Please return the device to our sales partner.
1
Device type not supported
2
HW revision not supported
Check the firmware version.
If necessary, request an update from the Technical Support.
3
Device functionality restricted!
Please return the device to our sales partner.
4
Invalid power module type
Check the firmware version.
If necessary, request an update from the Technical Support.
5
Incompatibility firmware / hardware.
The firmware is not suitable for the
device.
Check the firmware version.
If necessary, request an update from the Technical Support.
26
0
No user parameter set
Load the default parameter set.
1
Checksum error
If the error is still present, return the device to our sales
partner.
2
Flash: write error
Please return the device to our sales partner.
3
Flash: delete error
4
Flash: error in the internal flash
Reload the firmware.
If necessary, contact the Technical Support.
5
No calibration data
6
No user position data set
Save and reset.
Load the default parameter set.
If the error occurs again, contact the Technical Support.
