SCREEN BLINDS
97
Technical Specification
SCREEN BOX (2-01451-PU11)
The outside frame of the screen box is made up of 2 parts of extruded aluminium: the U-shaped box profile (B) and the
hinged base plate (H). The sides are sealed with side consoles (D), in which a removable fabric roll (C) can be placed using
the insert modules (I). The base plate touchers (F), together with the insert modules, are secured to the side consoles using
bolts (G). Then the sides of the base plate can be bolted to these touchers.
There is a cable duct (A) on the side console and a cable clamp (J) on the base plate to keep the motor cable in place.
There is one type of box available for the HR10-ZIP integral screen. The dimensions of the box cross-section are 122 mm x 140 mm.
F
I
H
G
A
E
J
C
D
B
F
I
H
G
A
E
J
C
D
B
F
G
E
H
D
D
F
G
E
C
C
B
B
H
C
A
H
I
(A) Cable duct
(D) Side console
(G) Bolt M8 x 18
(I) Insert module
(B) Box profile
(E) Bottom lath
(H) Base plate
(J) Cable clamp
(C) Fabric roll
(F) Base plate toucher
Make sure that the base plate of the screen box and the hinged section of the guide rail (see page 8 under 8. guide rails)
can always be opened, so that the mechanical parts inside are accessible at all times. If this rule is not respected, ISOTRA
cannot be held responsible for the cost of demolition work or any paint work or wallpapering!
Note: If the box is installed the other way round, it should be possible to open the window inwards. In the event of a
technical fault when the shutter is down, you must access the box along the inside.
Weight
For an integral screen with a width of 3.0 metres and an height of 1.5 metres, the total weight is approx. 34.5 kg.
The weight of the box base on Ø 78 mm aluminium
The weight of two standard 1120 lateral guides:
fabric roll, motor and Satiné fabric:
BOX
2 GUIDE RAILS
LENGTH
WEIGHT
LENGTH
WEIGHT
1,0 m
±13 kg
0,5 m
±2,5 kg
1,5 m
±16 kg
1,0 m
±5 kg
2,0 m
±20 kg
1,5 m
±7,5 kg
2,5 m
±23 kg
2,0 m
±10 kg
3,0 m
±27 kg
2,5 m
±12,5 kg
3,5 m
±30 kg
3,0 m
±15 kg
4,0 m
±34 kg
3,5 m
±17,5 kg
4,5 m
±37 kg
4,0 m
±20 kg
4,5 m
±22,5 kg
Summary of Contents for HRS-ZIP
Page 1: ...TECHNICAL MANUAL SCREEN BLINDS EN...
Page 3: ...SCREEN BLINDS 3 CE Product Marking...
Page 4: ...SCREEN BLINDS 4...