Isotra HRS-ZIP, Technical Manual

Page: 99 / 154

SCREEN BLINDS
99
D
C
B
E
A
Optie A2656 : clipsprofiel
D
C
B
E
A
Raam-
zijde
40
122 20
The complete wide 1120 guide rails are made up of a base section (C), a hinged section (E) and a holder (B) with zipper
profile (A), and at the bottom of the base section of each guide rail an aluminium end cap. On the window-side, the hinged
section hinges into the base section of the guide rail and on the outside the hinged section clicks into the plastic clamps
(D) that can be found on the base section (see figure). The holder and the zipper profile can only be inserted when the
hinged section is closed. This is because the holder and the zipper profile are 35 mm longer than the guide rail and are first
placed in the box and then further in the recess of the hinged section.
The base and hinged section are extruded aluminium profiles, both of which have a layer of powder coating. The holder
and the zipper profile are both made of plastic.
If you want to fit an insect screen between the screen and the window, then adjustment click profiles need to be placed on
the box and the guide rail.
If you want to fit an insect screen between the screen and the window, then adjustment click profiles need to be placed on
the box and the guide rail.
If selecting option of click profile, then the clip profiles are secured to the bottom with an end cap, using these screws. The
basic elements can then be clipped onto it.
The screen box is then placed on the guide rails, with the pivots in the guide rails.
(A) Zipper profile & leaf springs
(B) Holder for zipper profile glissiere
(C) Base section guide rail 1120
(D) Clip for hinged section
(E) Hinged section guide rail 1120
Zip click profile
Window
side
Guide rails
Guide rail (6-015157)