SCREEN BLINDS
115
Assembly to wall
Mark the position of angle-section brackets and holes to be drilled. For upper boxes having the width of max. 1.5 m, two
brackets are sufficient, which must be installed in a distance of approximately 15–20 cm from each end. For wider roller
blinds, four brackets (two pairs) are necessary, one in a distance of 15–20 cm from each end and the second in a distance of
50–60 cm from the first one.
Assembly holes must be placed at least 25 and 50 mm from
the ceiling or any obstacle exceeding the box. Attach brac-
kets using screws and components suitable for the type
of structure onto which they are to be attached (metallic
structure, window frame, wall, other material). If four brac-
kets are used, ensure that the brackets are perfectly aligned
± 1 mm; this can be checked by sliding the box along the
cut-outs before tightening the attachment screws. Install
the box to brackets and slide it lengthwise until it is centred
within the window wing.
SCREEN ZIP
Assembly to wall
Summary of Contents for HRS-ZIP
Page 1: ...TECHNICAL MANUAL SCREEN BLINDS EN...
Page 3: ...SCREEN BLINDS 3 CE Product Marking...
Page 4: ...SCREEN BLINDS 4...
