SCREEN BLINDS
90
Make sure the sliding blocks of the bottom slat
enter the guide rail slots correctly and the zipper
on the fabric slides into the U-shaped part of the
plastic guide profile.
Step 3: Positioning the box and the guide rails
Now lift the screen box with the guide rails. Do this
with at least two persons. Support the box and the
guide rails at the same time.
Place the complete screen assembly in or against
the window opening.
For motorised operation, feed the motor cable in-
side through the previously drilled lead-through.
Attention! Be careful not to break off the pivots of the box by
moving the guide rails too much forwards, backwards
or sideways.
Step 4: Attaching the box to the mounting brackets
and screwing the guide rails in place
(1) Push the box upwards into the mounting brackets.
(2) Feed the motor cable through to the inside. Then
push the box into the brackets so the slots in the back of
the box engage with the L-profilings.
(3) Next tighten the Allen screws of each bracket. The
screws should grip in the slots at the top of the front of
the box.
Screw the guide rails to the mounting surface.
Make sure the box is always securely mounted.
1
2
3
4 mm
A
A
B
7
A
B
A
A
B
B
A
A
B
B
7
METHOD 3:
Screwing the guide rails in place and then pushing the box onto the guide rails (only for screens without mounting
brackets)
through hole chamber
of guide rail
for clips
through hole chamber
of guide rail
Summary of Contents for HRS-ZIP
Page 1: ...TECHNICAL MANUAL SCREEN BLINDS EN...
Page 3: ...SCREEN BLINDS 3 CE Product Marking...
Page 4: ...SCREEN BLINDS 4...
