Isotra HRS-ZIP, Technical Manual

Page: 71 / 154

SCREEN BLINDS
71
Specification (for handle)
*except of plastic parts
Standard Dimensions
Standard dimensions for box 150
Control
Width
(mm)
Height
(mm)
Guaranteed area
(m
2
)
min. max. min. max. max.
handle
400 3000 400 5000 12
motor RTS, iO, WT 795 6000 400 5000 18
solar system* 595 2500 400 3000 7,5
Max. height with STNZ, STNBZ, SCR4005, SLTZB92, SERGE 3Z fabrics is only 4500 mm
* box design angular only
Standard dimensions for Box 110
Control
Width
(mm)
Height
(mm)
Guaranteed area
(m 2 )
min. max. min. max. max.
handle 400 3500 400 3500 10
motor RTS, iO, WT 795 3800 400 3500 13
solar system*
595 2500 400 3000 7,5
Max. height with STNZ, STNBZ, SCR4005, SLTZB92, SERGE 3Z fabrics is only 2600 mm
Standard dimensions for box 90
Control
Width
(mm)
Height
(mm)
Guaranteed area
(m 2 )
min. max. min. max. max.
handle 400 2800 400 2500 7
motor RTS, iO, WT 795 2800 400 2500 7
solar system* 595 2500 400 3000 7
Max. height with STNZ, STNBZ, SCR4005, SLTZB92, SERGE 3Z fabrics is only 1800 mm
Standard dimensions for box 70
Control
Width
(mm)
Height
(mm)
Guaranteed area
(m 2 )
min. max. min. max. max.
handle 400 2500 400 1200 3
motor LS40
580 2500 400 1200 3
motor 40 iO 635 2500 400 1200 3
Max. height with STNZ, STNBZ, SCR4005, SLTZB92, SERGE 3Z fabrics is only 900 mm
Fabrics of the Blackout type:
The opaque layer is located on the side of the window for each type of installation. In the case of outdoor installation,
strong winds can cause a slight lifting of the base slat and fabric and therefore 100% blackout cannot always be guaran-
teed. In the case of Blackout fabrics, the zippers are fastened on the face side and not on the opaque layer, so it is possible
that under strong wind or oblique view of the guide rail a piece of cloth from the zipper tape can be seen, but this is of little
importance compared to tightness of the fabric (reducing the waves).
Common phenomena of technical fabrics
The fabric may curl around the welds or in the middle of the fabric, it is the so-called tree effect. This phenomenon is co-
mmon because different forces act on the fabric during use. Another phenomenon may be visible bruises on the fabric
caused by the roller. These disappear at higher temperatures when the fabric levels.
Box Bottom Side guidance
square rounded rail guide rail
Abbreviation SCREEN HR8-ZIP box 110 ZPH152 ZPH153 ZPH154 ZPH156 ZPH155
Dimension
(mm) 70x70, 90x90,
110x110, 150c150
70x70, 90x90,
110x110, 150x150
18x50 30x55 20x55 40x55 30x110 20x110
Material Al Al Al Al Al Al Al Al
type 829 type 820 type 828 type 855 type 856
Colour Standard:
RAL 9006 light silver
RAL 9007 dark silver
RAL 9010 white
RAL 7016 anthracite grey
RAL 7016S anthracite grey structure
RAL 8014 brown Other RAL colors upon request*