SCREEN BLINDS
134
SCREEN GW
Assembly
Assembly to wall
Mark the position of angle-section brackets and holes to be drilled. For upper boxes having the width of max. 1.5 m, two
brackets are sufficient, which must be installed in a distance of approximately 15–20 cm from each end. For wider roller
blinds, four brackets (two pairs) are necessary, one in a distance of 15–20 cm from each end and the second in a distance of
20–60 cm from the first one.
Attach brackets using screws and components suitable for
the type of structure onto which they are to be attached
(metallic structure, window frame, wall, other material). If
four brackets are used, ensure that the brackets are per-
fectly aligned ± 1 mm; this can be checked by sliding the
box along the cut-outs before tightening the attachment
screws. Insert the box to brackets and slide it lengthwise
until it is centred within the window wing, and secure with
wedges.
Summary of Contents for HRS-ZIP
Page 1: ...TECHNICAL MANUAL SCREEN BLINDS EN...
Page 3: ...SCREEN BLINDS 3 CE Product Marking...
Page 4: ...SCREEN BLINDS 4...
