Isotra HRS-ZIP, Technical Manual

Page: 52 / 154

SCREEN BLINDS
52
Step 2: Sliding the guide rails on the side piece pins
Place the roller blind box on the cardboard packaging (take care
not to damage the surface treatment).
Remove the front cover of the box.
Then slide the predrilled guide rails to the side piece pins.
Make sure whether the bottom slat end pieces fit properly in the
guide rail slots and whether the fabric zipper fits in the plastic
insert in the bottom slat.
Step 3: Fitting the box and guide rails
Lift the box with the guide rails. Do this in cooperation with at
least two other persons depending on the overall box width.
Place the complete assembly to the assembly area.
Caution! Make sure not to break off
the pins by sliding the guide rails too
forward, backward, or sideward.
Variant B: Using the assembly profile
Step 1: Installing the profile
Place the profile to the assembly surface and indicate the
spots according to the predrilled holes. The assembly surface
must be perfectly horizontal!
Predrill the holes according to the fasteners used and attach
the assembly profile.