Isotra HRS-ZIP, Technical Manual

Page: 64 / 154

SCREEN BLINDS
64
1 2 3
B1 B1
B
1 2 3
B
1 2
B
1 2
B1
B
It is possible to use 1 box for 2 or 3 screens.
DVC: screens directly next to each other
DVS: Screen with a small gap of:
- Min 25 mm
- Max 500 mm
Maximum width of box is 6 m.
Possible with 1, 2 or 3 operation:
- Minimal width for each part is depending the operation.
- Maximum overall width per operation.
Handle and electrical operation can be coupled up to 6 m.
Center control is possible with multiple opeations.
It is recommended to place the operating unit in the largest screen when possible.
Coupled screens
B = box width
B1 = width between screens
1DVC3 - 1st screen of 3 screens in common box
2DVC3 - 2nd screen of 3 screens in common box
3DVC3 - 3rd screen of 3 screens in common box
1DVC2 - 1st screen of 2 screens in common box
2DVC2 - 2nd screen of 2 screens in common box
1DVS3 - 1st screen of 3 screens in common box
2DVS3 - 2nd screen of 3 screens in common box
3DVS3 - 3rd screen of 3 screens in common box
1DVS2 - 1st screen of 2 screens in common box
2DVS2 - 2nd screen of 2 screens in common box
1DVC2
2DVC3
2DVC2
1DVC3 3DVC3
1DVS3 2DVS3 3DVS3
2DVS2 1DVS2
SCREEN HR7
Measurement
Finished width B = size between rear ends of the consoles.
Finished height H = height including the box, including the
guide end caps (thickness = 2 mm) excluding mounting
brackets.
Note: The finished height H with steel calbe guides is the
height from the top odge of the box to the lower edge of
bottom lath.
2
B
H
12