One Touch™ 1100 Series
Remote Control Operated
Lithium Re-chargeable Battery Motor Instructions
R1710 - Lithium Re-chargeable Battery Motor
Using R1720 - 5 channel remote control
Set-up mid-point limit
8. Press
UP
or
DOWN
button on the
remote to move the blind and press
STOP
when desired mid-point limit
is reached.
9. Press and hold the
LIMIT
button
first then whilst holding
LIMIT
press
UP button on the remote until the
motor jogs. Mid-point is now set.
10. Press
STOP
to move the blind to
Mid-point position.
Delete original handset on motor
1. Press and hold
SETTING
button on
the motor mount and the motor will
jog (2-3 times in one motion) and
then release the button.
FAQ: If the motor does not work:
• Please charge the motor battery first.
• If the motor does not stop at the required point, then the stops must be reset.
Delete mid-point limit
11. Press
UP
or
DOWN
button on
the remote to send blind to upper
or lower limit.
12. Press and hold
LIMIT
button first
then whilst holding
LIMIT
press
UP
on the remote until the motor
jogs. Mid-point is now deleted.
8
9
10
11
12
Setting button (Red)
1
Issue: 9/16
Set-up upper limit
5. Press
UP
button on the remote to
move the blind up and press
STOP
when desired upper limit is reached.
6. Press
UP
button and the motor
will run steps to set the upper limit
accurately.
7. Press
CONFIRM
button on the
remote and the motor will jog 2
times, the upper limit is set.
5
6
7
Visit the Louvolite website to view the links to all of our fitting instructional videos
www.louvolite.com
Louvolite Customer Services Tel: 0161 882 5050 Email: [email protected]
Please note:
The group channel will be recorded on the motor automatically when
the single channel has been programmed on the motor. Cycle through the channels
until all the lights are lit to access the group channel on the remote.
