SCREEN BLINDS
117
Assembly of GS40 guide rail
For model ZIP, only one type of guide rail is available – GC20.
The rail is supplied with pre-drilled holes, as per order, from the front or from
the side.
Placement of holes:
- outer holes are placed approx. 10 cm from the bar edge;
- intermediate holes are placed at approx. each 50–80 cm evenly along
the guide bar.
Assembly of plastic parts
Handle the roller blind carefully and pull the fabric down by 20 cm.
Slide lower section (5) to the side so that the fabric leaves the lateral slot on
one side. Then insert inner rail (6) to the fabric and squeeze in ZIP (7).
1. Squeeze the inner rail directly to the guide rail lateral slot where it will strai-
ghten spontaneously. The inner rail lies on the ground or on the end piece
and there is no need to fix it.
2. Slide guide rail cover (9) aslant, fixing guide rail (6) in the guide rail. Use
gentle pressure to click it to right position and fix with screws. Start form the
top and slowly move down the guide rail.
The red line indicates the vertical axis for attachment screws. Use the drilled
guide bars as a template for transferring the hole positions to the window
wing wall. Attach the guide bars to the wall using screws and components
suitable for the type of structure onto which they are to be attached (metallic
structure, cement, brick, etc.).
A - standard version
B - put a note in the order form for B assembly
Once the assembly is finished, check parallelism and rectangularity of the
guide bars. This can be done by measuring two distances “S1” and “S2” or
diagonals “D1” and “D2”. The dimensions must be the same ±2 mm. Proper
guide bar placement is vital, otherwise the function of the roller blind can be
impaired. For front guide bar installation, self-adhesive covers are supplied
to cover the attachment screw holes.
A
B
Summary of Contents for HRS-ZIP
Page 1: ...TECHNICAL MANUAL SCREEN BLINDS EN...
Page 3: ...SCREEN BLINDS 3 CE Product Marking...
Page 4: ...SCREEN BLINDS 4...
