SCREEN BLINDS
88
Step 4: Installing the guide rails
(1) Affix the clips to the mounting surface. Next slide the guide rails onto the guide rail pivots of the side consoles. Make
sure the sliding blocks of the bottom slat enter the guide rail slots correctly and the zipper on the fabric slides into the U-
-shaped part of the plastic guide profile.
(2) Screw the guide rails to the mounting surface.
2
1
Step 3: Drilling the mounting holes for the guide rails
Mark the holes to be drilled on the wall or on the mounting
surface. Use the pre-drilled lateral guide rails for this proce-
dure. Drill the holes in the wall (Ø6 mm) or in the window
frame (Ø3.2 mm).
For installation to the wall, insert S6 plugs into the holes.
through hole chamber
of guide rail
for clips
through hole chamber
of guide rail
4 mm
A
A
B
7
A
B
B
A
7
Summary of Contents for HRS-ZIP
Page 1: ...TECHNICAL MANUAL SCREEN BLINDS EN...
Page 3: ...SCREEN BLINDS 3 CE Product Marking...
Page 4: ...SCREEN BLINDS 4...
