SCREEN BLINDS
133
SCREEN GW
Assembly
Assembly to ceiling
Mark the position of holes to be drilled, considering the following factors:
- for upper boxes having the width of max. 4.0 m, two brackets (6) are sufficient which must be installed in a distance
of approximately 15–20 cm from each end;
- for wider roller blinds, four brackets (two pairs) are necessary, one in a distance of 15–20 cm from each end and the
second in a distance of 20–60 cm from the first one;
- if possible, the distance from the wall depends on the bracket attachment method, i.e. the position of wedges (7):
- front wedge:
52 mm
- rear wedge:
100 mm
The following facts must be kept in mind:
- assembly of a bracket with attachment screws / wedges pointing toward the room minimises the distance be-
tween the upper box and the rear wall, but the bracket is visible and not visually attractive;
- assembly of a bracket with attachment screws / wedges in the back is more aesthetically desirable, but requires at
least 5 cm of space between the back wall and the upper box.
Attach brackets (6) using screws and components
suitable for the type of structure onto which they
are to be attached (metallic structure, window fra-
me, wall, other material). If four brackets are used,
ensure that the brackets are perfectly aligned ± 1
mm; this can be checked by sliding the box along
the cut-outs before tightening the attachment
screws.
Insert the upper box to brackets (6) and slide it lengthwise until it is centred within the window wing, and secure with wed-
ges (7).
Summary of Contents for HRS-ZIP
Page 1: ...TECHNICAL MANUAL SCREEN BLINDS EN...
Page 3: ...SCREEN BLINDS 3 CE Product Marking...
Page 4: ...SCREEN BLINDS 4...
