iES12G
User’s
Manual
UM-iES12G-1.72.2-EN.docx
Pages 86 of 166
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
Label
Description
Scheduler Mode
Controls whether the scheduler mode is Strict Priority or
Weighted on this switch port.
Queue Shaper
Enable
Check to enable queue shaper for individual switch ports.
Queue Shaper
Rate
Configures the rate of each queue shaper. The default value is
500. This value is restricted to 100 to 1000000 when the Unit is
kbps, and it is restricted to 1 to 3300 when the Unit is Mbps.
Queues Shaper
Unit
Configures the rate of each queue shaper. The default value is
500. This value is restricted to 100 to 1000000 when the Unit" is
kbps, and it is restricted to 1 to 3300 when the Unit is Mbps.
Queue Shaper
Excess
Allows the queue to use excess bandwidth
Queue Scheduler
Weight
Configures the weight of each queue. The default value is 17. This value is
restricted to 1 to 100. This parameter is only shown if
Scheduler Mode is set to Weighted.
Queue Scheduler
Percent
Shows the weight of the queue in percentage. This parameter is
only shown if Scheduler Mode is set to Weighted.
Port Shaper
Enable
Check to enable port shaper for individual switch ports
Port Shaper Rate
Configures the rate of each port shaper. The default value is 500.
This value is restricted to 100 to 1000000 when the Unit is kbps, and it is
restricted to 1 to 3300 when the Unit is Mbps.
Port Shaper Unit
Configures the unit of measurement for each port shaper rate as
kbps or M bps. The default value is kbps.
Save
Click to save changes.
Reset
Click to undo any changes made locally and revert to previously saved values.
Cancel
Click to undo any changes made locally and return to the previous page.
DSCP-Based QoS
This page allows the user to configure basic QoS DSCP-Based QoS Ingress Classification settings for
all switches.
