iES12G
User’s
Manual
UM-iES12G-1.72.2-EN.docx
Pages 157 of 166
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
Command Groups
Welcome to IES12G Command Line Interface.
Type 'help' or '?' to get help.
>
General Commands:
-----------------
Help/?: Get help on a group or a specific command
Up : Move one command level up
Logout: Exit CLI
Command Groups:
--------------- IES12G
System : System settings and reset options
IP : IP configuration and Ping
Auth : Authentication
Port : Port management
Aggr : Link Aggregation
LACP : Link Aggregation Control Protocol
STP : Spanning Tree Protocol
Dot1x :IEEE 82.1X port authentication
IGMP :Internet Group Management Protocol snooping
LLDP : Link Layer Discovery Protocol
MAC : MAC address table
VLAN : Virtual LAN
QoS : Quality of Service
ACL : Access Control List
Mirror : Port mirroring
Config : Load/Save of configuration via TFTP
SNMP : Simple Network Management Protocol
Firmware : Download of firmware via TFTP
Type '<group>' to enter command group, e.g. 'port'.
Type '<group> ?' to get list of group commands, e.g. 'port ?'.
Type '<command> ?' to get help on a command, e.g. 'port mode ?'.
Commands may be abbreviated, e.g. 'por co' instead of 'port configuration'.
>
Figure 156 - Command Groups Printout
