iES12G
User’s
Manual
UM-iES12G-1.72.2-EN.docx
Pages 121 of 166
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
Figure 120 - Radius Accounting Server Status Configuration
Label
Description
#
The RADIUS server number. Click to navigate to detailed statistics of the server.
IP
Address
The IP address and UDP port number (in <IP Address>: <UDP Port> notation) of the server.
For example, 0.0.0.0:1812.
Status
The current status of the server. This field takes one of the following values:
Disabled:
The server is disabled.
Not Ready:
The server is enabled, but IP communication is not yet up and running.
Ready:
The server is enabled, IP communication is up and running, and the RADIUS
module is ready to accept access attempts.
Dead
(X seconds left): Access attempts were made to this server, but it did not reply within
the configured timeout. The server has temporarily been disabled, but will get re-enabled
when the dead-time expires. The number of seconds left before this occurs is displayed in
parentheses. This state is only reachable when more than one server is enabled.
RADIUS Details
This page provides detailed statistics for a particular RADIUS server.
The statistics map is as per those specified in
RFC4668 - RADIUS Authentication Client MIB
server select box to switch between the backend servers to show details for.
Figure 121 - Radius Authentication Statistics for Server #1
