IS5 COMMUNICATIONS IES12G, User Manual

Page: 124 / 177

iES12G User’s Manual
UM-iES12G-1.72.2-EN.docx Pages 113 of 166
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
Label Description
RARP Target
Match
Specifies whether frames will meet the action according to their target hardware
address field (THA) settings.
0 : RARP frames where THA is not equal to the target MAC address
1 : RARP frames where THA is equal to the target MAC address
Any : any value is allowed (" don't-care ")
IP/Ethernet
Length
Specifies whether frames will meet the action according to their ARP/RARP
hardware address length (HLN) and protocol address length (PLN) settings.
0 : ARP/RARP frames where the HLN is equal to Ethernet (0x06) and
the (PLN) is equal to IPv4 (0x04) must not match this entry.
1 : ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal
to IPv4 (0x04) must match this entry.
Any : any value is allowed (" don't-care ").
IP
Specifies whether frames will meet the action according to their ARP/RARP
hardware address space (HRD) settings.
0 : ARP/RARP frames where the HLD is equal to Ethernet (1) must not match this
entry.
1 : ARP/RARP frames where the HLD is equal to Ethernet (1) must match this entry.
Any : any value is allowed (" don't-care ").
Ethernet
Specifies whether frames will meet the action according to their ARP/RARP
protocol address space (PRO) settings.
0 : ARP/RARP frames where the PRO is equal to IP (0x800) must not match this entry.
1 : ARP/RARP frames where the PRO is equal to IP (0x800) must match this entry.
Any : any value is allowed (" don't-care ").
ICMP Parameters
ICMP Parameters can be configured when:
•
Frame Type is IPv4
•
IP Protocol Filter is Internet Control Message Protocol (ICMP)
Figure 112 - ICMP Parameters