iES12G
User’s
Manual
UM-iES12G-1.72.2-EN.docx
Pages 8 of 166
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
HARDWARE OVERVIEW
2.1
Front Panel
The iES12G hardware overview is as follows:
Description
Specification
8 X 10/100/1000Base-T(X) RJ45
Auto MDI/MDIX
8
4 X 100/1000Base-X SFP
4
RS-232 Serial Console Port
RS-232 with RJ45 connector with console cable: 115200 bps, 8, N, 1
Figure 1
–
Front Panel
1
Reset button. Push the button 3 seconds for reset; 5 seconds for factory default.
2
LED for PWR. When the PWR UP, the green led will be light on
3
LED for PWR1
4
LED for PWR2
5
LED for R.M (Ring master). When the LED light on, it means that the switch is the ring
master of Ring.
LED for Ring. When the led light on, it means the Ring is activated.
6
LED for Ring. When the led light on, it means the iRing is activated.
7
LED for Fault. When the light on, it means Power failure or Port down/fail.
8
Console port (RJ-45)
9
100/1000 Base-X SFP (ports G9-G12)
10
LED for Ethernet ports link status.
11
LED for Ethernet ports speed status
12
10/100/1000Base-T(X) ports
13
LED for SFP ports link status.
14
Port G12 - 100/1000 Base-X SFP
