iES12G
User’s
Manual
UM-iES12G-1.72.2-EN.docx
Pages 125 of 166
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
Rx/Tx
Name
RFC4670 Name [4]
Description
Tx
Pending
Requests
radiusAccClientExtPendingRequests
The number of RADIUS
packets destined for the
server that have not yet
timed out or received a
response. This variable is
incremented when a Request
is sent and decremented due
to receipt of a Response,
timeout, or retransmission.
Tx
Timeouts
radiusAccClientExtTimeouts
The number of accounting
timeouts to the server. After
a timeout, the client may
retry to the same server,
send to a different server, or
give up. A retry to the same
server is counted as a
retransmit as well as a
timeout. A send to a different
server is counted as a
Request as well as a timeout.
Other info:
This section contains information about the state of the server and the latest round-trip time.
Name
RFC4668 Name
Description [4]
IP
Address
-
IP address and UDP port for the authentication server in
question.
State
-
Shows the state of the server. It takes one of the following values:
Disabled
: The selected server is disabled.
Not Ready
: The server is enabled, but IP communication is not
yet up and running.
Ready
: The server is enabled, IP communication is up and
running, and the RADIUS module is ready to accept accounting
attempts.
Dead
(X seconds left): Accounting attempts were made to this
server, but it did not reply within the configured timeout. The
server has temporarily been disabled, but will get re-enabled
when the dead-time expires. The number of seconds left before
this occurs is displayed in parentheses. This state is only
reachable when more than one server is enabled.
Round-
Trip
Time
radiusAccClientExt
RoundTripTime
The time interval (measured in milliseconds) between the most
recent Response and the Request that matched it from the
RADIUS accounting server. The granularity of this measurement
is 100 ms. A value of 0 ms indicates that there hasn't been round-
trip communication with the server yet.
Label
Description
Auto-refresh
Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
Refresh
Click to refresh the page immediately.
Clear
Clears the counters for the selected server. The "Pending Requests" counter
will not be cleared by this operation.
