iES12G
User’s
Manual
UM-iES12G-1.72.2-EN.docx
Pages 104 of 166
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
ACL
Ports
This page allows the user to configure the Access Control Entry (ACE) of each switch port. These
parameters will affect frames received on a port unless the frame matches a specific ACE.
Figure 103 - ACL Ports Configuration
Label
Description
Port
The logical port for the settings contained in the same row.
Policy ID
Select the policy to apply to this port. The allowed values are
0
through
255
. The
default value is 0.
Action
Select to
Permit
or
Deny
forwarding. The default value is
Permit
.
Rate Limiter ID
Select a rate limiter for the port. The allowed values are
Disabled
or numbers
from
1 to 16
. The default value is Disabled.
Port Redirect
Select which port frames are redirected on. The allowed values are
Disabled
or a
specific port number and it can't be set when action is permitted. The default
value is
Disabled
.
Mirror
Specify the mirror operation of this port. The allowed values are:
Enabled
: Frames received on the port are mirrored.
Disabled
: Frames received on the port are not mirrored.
The default value is "Disabled".
Logging
Specifies the logging operation of the port. The allowed values are:
Enabled
: frames received on the port are stored in the system log.
Disabled
: frames received on the port are not logged.
The default value is
Disabled
. Please note that system log memory capacity and
logging rate is limited.
Shutdown
Specifies the shutdown operation of this port. The allowed values are:
Enabled
: if a frame is received on the port, the port will be disabled.
Disabled
: port shut down is disabled.
The default value is
Disabled
.
