iES12G
User’s
Manual
UM-iES12G-1.72.2-EN.docx
Pages 30 of 166
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
information for each port on which an LLDP neighbor is detected. The columns include the
following information:
Figure 30 - LLDP Neighbor Information
Label
Description
Local Port
The port on which the LLDP frame was received.
Chassis ID
The
Chassis ID
is the identification of the neighbour's LLDP frames.
Remote Port
ID
The
Remote Port ID
is the identification of the neighbour port.
System
Name
The name advertised by the neighbor.
Port
Description
The description of the port advertised by the neighbor.
System
Capabilities
Description of the neighbor's capabilities. The capabilities include:
Other
Repeater
Bridge
WLAN Access Point
Router
Telephone
DOCSIS Cable Device
Station Only
Reserved
When a capability is enabled, a (+) will be displayed. If the capability is disabled,
a (-) will be displayed.
Management
Address
Management Address
is the neighbour unit's address that is used for higher layer
entities to assist discovery by the network management. This could for instance hold
the neighbour's IP address.
Refresh
Click to refresh the page immediately
Auto-refresh
Check to enable an automatic refresh. Automatic refresh occurs every 3 seconds.
LLDP Statistics
This page provides an overview of all LLDP traffic.
Two types of counters are shown.
Global Counters
are counters that refer to the whole switch, while
Local Counters
refer to per port counters for the currently selected switch.
