IS5 COMMUNICATIONS IES12G User Manual Download Page 104

Page: 104 / 177

iES12G

User’s

Manual

UM-iES12G-1.72.2-EN.docx

Pages 93 of 166

Label

Description

Frame Type

Indicates the type of frame to look for incoming frames. Possible frame types are:

Any

: the QCE will match all frame type.

Ethernet

: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.

LLC

: Only (LLC) frames are allowed.

SNAP

: Only (SNAP) frames are allowed.

IPv4

: the QCE will match only IPV4 frames.

IPv6

: the QCE will match only IPV6 frames.

Port

Indicates the list of ports configured with the QCE.

Action

Indicates the classification action taken on ingress frame if parameters configured

are matched with the frame's content.

There are three action fields:

Class

DPL

, and

DSCP

Class

: Classified QoS; if a frame matches the QCE, it will be put in the queue.

DPL

: Drop Precedence Level; if a frame matches the QCE, then DP level will be set to

a value displayed under DPL column.

DSCP

: if a frame matches the QCE, then DSCP will be classified with the value

displayed under DSCP column.

Conflict

Displays the conflict status of QCL entries. As hardware resources are shared by

multiple applications, resources required to add a QCE may not be available. In that

case, it shows conflict status as

Yes

, otherwise it is always

. Please note that conflict

can be resolved by releasing the hardware resources required to add the QCL entry

by pressing

Resolve Conflict

button

QCL status

Select one of the following to be displayed:

Combined

: Show both static and conflict entries.

Static:

Show static entries.

Conflict:

Show conflict entries.

Clear

Clear all statistics counters.

Auto-
refresh

Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.

Refresh

Click to refresh the page.

Summary of Contents for IES12G

















































































































































































Search results

Summary of Contents for IES12G

Reviews:

Related manuals for IES12G

Brands by name

Popular brands

IS5 COMMUNICATIONS IES12G, User Manual

Search results

Summary of Contents for IES12G

Reviews:

Related manuals for IES12G

Brands by name

Popular brands