iES12G
User’s
Manual
UM-iES12G-1.72.2-EN.docx
Pages 112 of 166
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
Label
Description
ARP/RARP
Specifies the available ARP/RARP opcode (OP) flag for the ACE
Any
: no ARP/RARP OP flag is specified (OP is "
don't-care
").
ARP
: frame must have ARP/RARP opcode set to ARP
RARP
: frame must have ARP/RARP opcode set to RARP.
Other
: frame has unknown ARP/RARP Opcode flag.
Request/Reply
Specifies the available ARP/RARP opcode (OP) flag for the ACE
Any
: no ARP/RARP OP flag is specified (OP is "
don't-care
").
Request
: frame must have ARP Request or RARP Request OP flag set.
Reply
: frame must have ARP Reply or RARP Reply OP flag.
Sender IP
Filter
Specifies the sender IP filter for the ACE
Any
: no sender IP filter is specified (sender IP filter is "
don't-care
").
Host
: sender IP filter is set to
Host
. Specify the sender IP address in the
SIP
Address
field that appears.
Network
: sender IP filter is set to
Network
. Specify the sender IP address
and sender IP mask in the
SIP Address
and
SIP Mask
fields that appear.
Sender IP
Address
When
Host
or
Network
is selected for the sender IP filter, you can enter a specific
sender IP address in dotted decimal notation.
Sender IP
Mask
When Network is selected for the sender IP filter, you can enter a specific sender
IP mask in dotted decimal notation.
refers to a method of writing IP addresses using decimal
numbers and dots as separators between octets. An IPv4 dotted decimal address
has the form x.y.z.w, where x, y, z, and w are decimal numbers between 0 and 255.
Target IP
Filter
Specifies the target IP filter for the specific ACE
Any
: no target IP filter is specified (target IP filter is "
don't-care
").
Host
: target IP filter is set to
Host
. Specify the target IP address in the
Target IP Address
field that appears.
Network
: target IP filter is set to
Network
. Specify the target IP address
and target IP mask in the
Target IP Address
and
Target IP Mask
fields that
appear.
Target IP
Address
When
Host
or
Network
is selected for the target IP filter, you can enter a specific
target IP address in dotted decimal notation.
Target IP
Mask
When
Network
is selected for the target IP filter, you can enter a specific target
IP mask in dotted decimal notation.
ARP Sender
MAC Match
Specifies whether frames will meet the action according to their sender hardware
address field (SHA) settings.
0
: ARP frames where SHA is not equal to the SMAC address
1
: ARP frames where SHA is equal to the SMAC address
Any
: any value is allowed ("
don't-care
").
