IS5 COMMUNICATIONS IES12G User Manual Download Page 133

Page: 133 / 177

iES12G

User’s

Manual

UM-iES12G-1.72.2-EN.docx

Pages 122 of 166

Label

Description

Server #n

↓

The server select drop down box determines which server

’s information

is shown by

selecting server #n. Where ‘n’ is a server, 1 to 5

Auto-refresh

Check this box to refresh the page automatically. Automatic refresh occurs every 3

seconds.

Refresh

Click to refresh the page immediately.

Clear

Clears the counters for the selected server. The "Pending Requests" counter will not

be cleared by this operation.

Packet Counters:

RADIUS authentication server packet counter. There are seven receive and four

transmit counters (see below for details).

Rx/Tx

Name

RFC4668 Name [3]

Description

Access

Accepts

radiusAuthClientExt

AccessAccepts

The number of RADIUS Access-Accept packets

(valid or invalid) received from the server.

Access

Rejects

radiusAuthClientExt

AccessRejects

The number of RADIUS Access-Reject packets (valid

or invalid) received from the server.

Access

Challenges

radiusAuthClientExt

AccessChallenges

The number of RADIUS Access-Challenge packets

(valid or invalid) received from the server.

Malformed

Access

Responses

radiusAuthClientExt

MalformedAccessRe

sponses

The number of malformed RADIUS Access-

Response packets received from the server.

Malformed packets include packets with an invalid

length.

Bad

authenticators

Message

Authenticator attributes or unknown types are not

included as malformed access responses.

Bad

Authenticator

radiusAuthClientExt

BadAuthenticators

The number of RADIUS Access-Response packets

containing invalid authenticators or Message

Authenticator attributes received from the server.

Unknown

Types

radiusAuthClientExt

UnknownTypes

The number of RADIUS packets that were received

with unknown types from the server on the

authentication port and dropped.

Packets

Dropped

radiusAuthClientExt

PacketsDropped

The number of RADIUS packets that were received

from the server on the authentication port and

dropped for some other reason.

Access

Requests

radiusAuthClientExt

AccessRequests

The number of RADIUS Access-Request packets

sent to the server. This does not include

retransmissions.

Access

radiusAuthClientExt

The number of RADIUS Access-Request packets

Summary of Contents for IES12G

















































































































































































Search results

Summary of Contents for IES12G

Reviews:

Related manuals for IES12G

Brands by name

Popular brands

IS5 COMMUNICATIONS IES12G, User Manual

Search results

Summary of Contents for IES12G

Reviews:

Related manuals for IES12G

Brands by name

Popular brands