IS5 COMMUNICATIONS IES12G User Manual Download Page 106

Page: 106 / 177

iES12G

User’s

Manual

UM-iES12G-1.72.2-EN.docx

Pages 95 of 166

IGMP Snooping VLAN Configurations

Each page shows up to 99 entries from the VLAN table, with a default value of 20, selected by the

Entries Per Page

input field. When first visited, the web page will show the first 20 entries from the

beginning of the VLAN Table. The first displayed will be the one with the lowest VLAN ID found in

the VLAN Table.

The

VLAN

input field allows the user to select the starting point in the VLAN Table. Clicking the

Refresh

button will update the displayed table starting from that or the next closest VLAN Table

match.

The

will use the last entry of the currently displayed entry as a basis for the next lookup. When

the end is reached, the text

No more entries

is shown in the displayed table. Use the

|<<

button to start over.

Figure 93 - IGMP Snooping VLAN Configuration

Label

Description

Delete

Check to delete the entry. The designated entry will be deleted during the next save.

VLAN ID

The VLAN ID of the entry.

Snooping
Enabled

Check to enable IGMP snooping for individual VLAN. Up to 32

VLAN’s

can be selected.

IGMP
Querier

Enable the IGMP Querier in the VLAN.

Add New
IGMP
VLAN

Click to add a new entry into the table.

Save

Click to save changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

Summary of Contents for IES12G

















































































































































































Search results

Summary of Contents for IES12G

Reviews:

Related manuals for IES12G

Brands by name

Popular brands

IS5 COMMUNICATIONS IES12G, User Manual

Search results

Summary of Contents for IES12G

Reviews:

Related manuals for IES12G

Brands by name

Popular brands