IS5 COMMUNICATIONS IES12G, User Manual

Page: 94 / 177

iES12G User’s Manual
UM-iES12G-1.72.2-EN.docx Pages 83 of 166
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
Figure 81 - QoS Ingress Queue Policers
Label Description
Port The port number for which the configuration below applies.
Enable Check to enable queue policer for individual switch ports
Rate
Configures the rate of each queue policer. The default value is 500 . This value is
restricted to 100 to 1000000 when the Unit is kbps , and is restricted to 1 to 3300
when the Unit is Mbps .
This field is only shown if at least one of the queue policers is enabled.
Unit Configures the unit of measurement for each queue policer rate as kbps or Mbps.
The default value is kbps .
This field is only shown if at least one of the queue policers is enabled.
Save
Click to save changes.
Reset
Click to undo any changes made locally and revert to previously saved values.
Port Schedulers
This page provides an overview of QoS Egress Port Schedulers for all switch ports.
Figure 82 - QoS Egress Port Policers
Label Description
Port
The logical port for the settings contained in the same row.
Click the port number to configure the schedulers. Details for configuration can be found
in the
QoS Egress Port Scheduler and Shapers section.
Mode
Shows the scheduling mode for this port.
Weight
Shows the weight for this queue and port.