1
General information
15
Always disengage the PTO, stop the
engine and remove the key before:
1. Connecting or disconnecting the PTO
shaft.
2. Adjusting the PTO driveline or PTO
driven machine.
3. Cleaning, unblocking or servicing the
PTO driveline
General driving
Keep the brake pedals latched together
at all times unless independent braking is
required. Never use independent braking
during transport.
Always drive at a safe speed relative
to local conditions and ensure that your
speed is low enough for an emergency
stop to be safe and secure.
Reduce speed on bends to avoid the
risk of overturning.
Operating the tractor beyond its design
limits can cause damage. It can also be
dangerous. Do not operate the machine
outside its limits. Do not try to upgrade
the tractor’s performance by unapproved
modifications.
Use a safety chain
A safety chain Will help control drawn
equipment should it accidentally separate
from the drawbar while transporting.
Using the appropriate adapter parts at-
tach the chain to the tractor drawbar sup-
port or other specified anchor locations.
Provide only enough slack in the chain to
permit turning. See ITMCO Dealer for a
chain with a strength rating equal to or
greater than the gross weight of the towed
machine.
Fig. 24: Using safety chain.
Safety — after operation
When stopping at any time, bring the
tractor to a secure halt, apply the parking
brake, disengage the PTO, place all gear
shift levers in neutral, lower the imple-
ment to the ground, stop the engine and
remove the key BEFORE leaving the seat.
Safety Decals
If this tractor has been purchased sec-
ond hand, refer to pages 16 and 17 in this
book to ensure that all the safety warning
decals are in the correct position and are
readable.
WARNING
DO NOT remove or obscure Caution,
Warning or Instruction Decals. Replace
any Caution, Warning or Instruction De-
cals that are not readable or are missing.
Replacement decals are available from
your Dealer in the event of loss or dam-
age. The actual location of these Safety
Decals is illustrated in this book on pages
16 and 17.
Summary of Contents for ITM 470
